WireGuard Clients configuring

• WireGuard Official clients
• Mikrotik WireGuard client configuration

WireGuard Official clients

Mikrotik WireGuard VPN module WISECP 

Order now | Download | FAQ

You can download from the https://www.wireguard.com/install/

Please always download latest versions. The following list is intended as a general direction only.

Windows [7, 8.1, 10, 11, 2008R2, 2012R2, 2016, 2019, 2022 – v0.5.3]

Download Windows Installer
Browse MSIs

macOS [app store – v1.0.15]

Download from App Store

Android [play store – vunknown – out of date & f-droid – v1.0.20220516]

Download from Play Store
Download from F-Droid

iOS [app store – v1.0.15]

Download from App Store

Debian/Ubuntu

$ sudo apt install wireguard

Mikrotik WireGuard client configuration

Mikrotik WireGuard VPN module WISECP 

Order now | Download | FAQ

Make sure you have an up to date routerOS system.

Version must be at least: 7.6

[admin@VPN-CLIENT] > system package print 
Columns: NAME, VERSION
# NAME      VERSION
0 routeros  7.6    

Open a single-use shipment on the WireGuard section for the client's configuration request

Login to Mikrotik via Winbox

Click on the menu item WireGuard In the window that opens, in the WireGuard tab, click the plus to add a new WireGuard interface

Copy the private key from the text configuration from the [Interface] section to the PrivateKey field in the WireGuard interface settings in Mikrotik

Click OK to create the interface

Go to the peers tab.
Click plus to add a new peer

Interface - Select the previously created WireGuard interface 

Public key - Copy the public key from the text configuration from the [Peer] section to the Public key field

Endpoint - Copy the server address from the text configuration from the [Peer] section to the endpoint field

Endpoint Port - Copy the server port from the text configuration from the [Peer] section to the Endpoint Port field

Allowed Address - Copy AllowedIPs from the text configuration from the [Peer] section to the Allowed Address field

Persistent Keepalive - Copy the PersistentKeepalive from the text configuration from the [Peer] section to the Persistent Keepalive field

Click OK to create a peer

In order to have communication with the server, you need to set the address on the WireGuard interface

Go to the menu item IP->Addresses In the window that opens, click the plus to assign an IP address to the WireGuard interface

Addresse - Copy the Address from the text configuration from the [Interface] section to the Address field

Interface - Select the previously created WireGuard interface 

Press the OK button to confirm

You also need to configure the traffic routes you need at your discretion.