# Installation and configuration guide
# Setup (install/update)
### ownCloud module **[WISECP](https://puqcloud.com/link.php?id=78)**
##### [Order now](https://puqcloud.com/index.php?rp=/store/wisecp-module-owncloud) | [Download](https://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud/) | [FAQ](https://faq.puqcloud.com/)
To install and update a module, you must perform one and the same action.
#####
##### 1. Download the latest version of the module.
```Powershell
wget http://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud/PUQ_WISECP-ownCloud-latest.zip
```
All versions are available: [https://download.puqcloud.com/WISECP/Product/PUQ\_WISECP-ownCloud/](https://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud)
#####
##### 2. Unzip the archive with the module.
```Powershell
unzip PUQ_WISECP-ownCloud-latest.zip
```
#####
##### 3. Copy and Replace "puqownCloud" from "PUQ\_WISECP-ownCloud" to "WISECP\_WEB\_DIR/coremio/modules/Product/"
# License Activation
### ownCloud module **[WISECP](https://puqcloud.com/link.php?id=78)**
##### [Order now](https://puqcloud.com/index.php?rp=/store/wisecp-module-owncloud) | [Download](https://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud/) | [FAQ](https://faq.puqcloud.com/)
##### 1. Log in to the administrative area of your **[WISECP](https://puqcloud.com/link.php?id=78)**.
#####
2. Go to module configuration.
```
Services -> Service Management -> Module Settings -> Other -> All Modules -> PUQ ownCloud
```
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485721333.png)
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485726951.png)
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485737918.png)
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703614894116.png)
##### 3. On the open page, enter the purchased license key for this product and click the '**Check and Save**' button to validate the key and save it.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703614921138.png)
# Add server (ownCloud) in WISECP
### ownCloud module **[WISECP](https://puqcloud.com/link.php?id=78)**
##### [Order now](https://puqcloud.com/index.php?rp=/store/wisecp-module-owncloud) | [Download](https://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud/) | [FAQ](https://faq.puqcloud.com/)
##### 1. Log in to the administrative area of your **[WISECP](https://puqcloud.com/link.php?id=78)**.
#####
2. Go to module configuration.
```
Services -> Service Management -> Module Settings -> Other -> All Modules -> PUQ ownCloud
```
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485721333.png)
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485726951.png)
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700485737918.png)
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703615118692.png)
##### 3. In the opened page, click the '**Add Server**' button.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703615171650.png)
#####
##### 4. On the opened page, enter all the necessary information:
- **Name**: Displayed name of the server.
- **Maximum Number of Accounts**: The number of services that can be on this server.
- **Server Group**: Optionally, choose the server group.
- **IP Address or Domain**: The address of the ownCloud server you are connecting to.
- **Username/Password**: Username and Password on the ownCloud server.
- Check the **SSL** box if you want to use SSL-encrypted connection. If necessary, specify the port and perform a connection test.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703615218695.png)
# Service/Product configuration
### ownCloud module **[WISECP](https://puqcloud.com/link.php?id=78)**
##### [Order now](https://puqcloud.com/index.php?rp=/store/wisecp-module-owncloud) | [Download](https://download.puqcloud.com/WISECP/Product/PUQ_WISECP-ownCloud/) | [FAQ](https://faq.puqcloud.com/)
If you do not have a **Service Group** where you want to place the new service, you need to create a new **Service Group**
##### 1. Log in to the administrative area of your **[WISECP](https://puqcloud.com/link.php?id=78)**.
##### 2. Create New Service Group
Go to
```
Services -> Service Management -> Add Group
```
[](https://doc.puq.info/uploads/images/gallery/2023-11/image-1700487270737.png)
Enter all the necessary data and click the '**Create Group**' button.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1702214064247.png)
##### 3. Adding a New Service
Go to
```
Services -> our service group where you need to add the new service.
```
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1702214168666.png)
In the opened window, click the '**Create New Service**' button.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1702214193287.png)
On the opened page, enter all the necessary details for your new service and navigate to the '**Core**' tab.
Select the '**PUQ ownCloud**' module from the drop-down list of modules.
[](https://doc.puq.info/uploads/images/gallery/2023-12/image-1703615431642.png)
##### 4. Fill in the configuration options according to your preferences.
- **Server Group** is the group of servers from which a server will be chosen for provisioning the service
- **Disk Limit:** is the disk space quota that is issued to the user
- **Group:** is the group that will be assigned to the user
- **Username Prefix** will be added at the beginning of the username during user creation and is used for uniqueness
- **Username Suffix** will be added at the end of the username during user creation and is also used for uniqueness
- **Link to Instruction** Provide the link to the instruction for the service, and it will be displayed in the client area as a separate button
- **Link to VPN Clients** Provide the link to the page for downloading VPN clients for the service, and it will be displayed in the client area as a separate button
- **Automatic Setup** Please activate for automatic installation of the order. Otherwise, administrator approval is required.