WHMCS Installation and Update

PUQVPNCP module WHMCS
Order now | Download | Community | PUQVPNCP | Order PUQVPNCP
System requirements

Important: This module works exclusively with PUQVPNCP and requires version 2.x or higher (PUQVPNCP Website | Order PUQVPNCP).

Requirement
Minimum

WHMCS
8.x+, 9.x+

PHP
7.4, 8.1, 8.2, 8.3, 8.4

PUQVPNCP panel
v2.x and higher

ionCube Loader
v15+

Note: The module uses ionCube encoding. Make sure ionCube Loader is installed and active on your server.

Installation

Note: The module now uses ionCube 15, which provides universal out-of-the-box support for all encodings.
All versions can be found at this link:
https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-PUQVPNCP/
Older module versions for WHMCS 8 are available in the archive directory:
https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-PUQVPNCP/archive/

Download the latest version from the PUQ download page:
wget https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-PUQVPNCP/PUQ_WHMCS-PUQVPNCP-latest.zip

Unzip the archive:
unzip PUQ_WHMCS-PUQVPNCP-latest.zip -d PUQ_WHMCS-PUQVPNCP-latest

Upload the module files to your WHMCS installation:

For Server modules: copy the puqVPNcp directory from the unzipped folder to whmcs/modules/servers/

cp -r PUQ_WHMCS-PUQVPNCP-latest/puqVPNcp /path/to/whmcs/modules/servers/

The module files are now in place. Proceed to the PUQVPNCP setup guide and configuration.

Update
The update procedure is the same as installation — replace the existing files with the new version:

Download the latest version as described in the Installation section.
Unzip the archive.
For server modules: simply overwrite the files in whmcs/modules/servers/puqVPNcp/. No deactivation is needed.
Verify the version number in the module interface matches the new release.