Steps after installation System config Order now | Download | FAQ System settings are located in the menu item Settings->System Traffic statistics Collection frequency - How often to collect traffic usage statistics, parameter in minutes. History - How long to keep the history of traffic statistics. Parameter in months. 0 means do not collect and store statistics WireGuard online timeout WireGuard online timeout - How long after the last handshake to consider that the host is offline Firewall settings Order now | Download | FAQ Due to the fact that different types of firewalls may be installed in the system, please pay attention to the correct settings in the Settings>Firewall section, as described below. This step is required for the solution to work properly. Firewall configuration is available in the menu item Settings->Firewall The following Firewall configurations are required for the correct operation of the WireGuard server Forwarding (NAT) Must be Enabled for VPN clients to access the internet. INPUT/FORWARD/OUTPUT policy Must be ACCEPT for VPN clients to access the internet. Internal Traffic ACCEPT - If you want to allow traffic exchange between VPN clients DROP - If you want to prohibit the exchange of traffic between VPN clients (it is possible to allow only on specific WireGuard interfaces) FILTER Rules In this configuration section it is possible to add/delete firewall rules in the filtr table Attention. Rules whose name starts with system_ are system rules and cannot be deleted. NAT Rules In the NAT Rules section, it is possible to view all the rules for which the system has automatically created. MANGLE Rules In the MANGLE Rules section, it is possible to view all the rules for which the system has automatically created. DNS settings Order now | Download | FAQ This step is required for the solution to work properly. Once DNS is properly installed, you need to enable it. DNS configuration is available in the menu item Settings->DNS The DNS server is configured as a caching DNS server for VPN clients. Attention. The use of the DNS server is possible only by the clients of the system. The system automatically configures the DNS server so that only those subnets that are configured in the system have access. License Order now | Download | FAQ License configuration is available in the menu item Settings->License By default, the system limit is 50 users and the API is disabled. In order to activate the license key, the key must be entered in the "License Key" field and click on the "Save" button In order to delete a license, you must click the "Delete" button