Windows IKEv2 client configuration

Order now | Download | FAQ

In order to connect to a VPN, follow these steps:

1. Open the link you received in a browser to get instructions and configuration for your new VPN connection. And you will see the following page in the browser window
   

   

2. In order to configure the VPN connection on Windows. You need to install a certificate. First, download the certificate from the IKEv2 section and save it on your device, for example, in the Downloads folder.
   

   

3. Go to the download folder, then double-click or in the context menu of the downloaded certificate file, click Open
   

    

4. You will see a warning window, click open.

   

5. After that, a window will open in which information about the certificate will be described. Click the "Install Certificate" button.

   

6. The Certificate Installation Wizard opens. Follow hints and logic. For example, select "For Local Machine" to have the certificate trusted by all users on your system. Next.
   

   

7. Select a location to save the certificate. This is the root certificate, so we will save it to the root certificates.
   

   

   

   

8. Check and save settings.
   
9. The system will see us that the certificate was imported successfully.
   

10. Let's move on to connection settings. We go to the network connection settings in the system parameters and create a new VPN connection.
    

11. Be sure to select IKEv2 and enter the correct data.

     

     

12. Congratulations! Your connection has been successfully set up!