Linux WireGuard client configuration

WireGuard Business-VPN module WISECP 

Order now | Download | FAQ

In order to connect to a VPN, follow these steps:

1. Open the link you received in a browser to get instructions and configuration for your new VPN connection. And you will see the following page in the browser window
   

   

2. In order to start the configuration you need to download the configuration file. To download the configuration file, click the "Dowload config file" button.
   

   

3. Save the file to downloads or any other place to import later. You can download the configuration file and move it to your server, or you can create a new file and copy the configuration text into it. We will copy the configuration text into a new file in this WireGuard client setup guide.
4. Since we are setting up a connection for an Linux device, we need the WireGuard client for Linux. To download and install the client on your device, by command sudo apt install wireguard
5. After installing the client, navigate to the folder cd /etc/wireguard/ and create a configuration file. With the help of the command nano wg0.conf
6. Copy the configuration text into your terminal window.
   

   

7. Save the file, after saving the file you need to complete the connection.
   Connect using the command: sudo wg-quick up wg0