WHMCS Installation and Update

Mikrotik WireGuard VPN module WHMCS

Order now | Download | Community

System requirements

Requirement	Minimum
WHMCS	8.x+, 9.x+.
PHP	7.4, 8.1, 8.2, 8.3, 8.4
ionCube Loader	v15+
Mikrotik RouterOS	7.x+

Note: The module uses ionCube encoding. Make sure ionCube Loader is installed and active on your server.

Installation

Note: The module now uses ionCube 15, which provides universal out-of-the-box support for all encodings.

All versions can be found at this link: https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-Mikrotik-WireGuard-VPN/

Older module versions for WHMCS 8 are available in the archive directory: https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-Mikrotik-WireGuard-VPN/archive/

1. Download the latest version from the PUQ download page:

   wget https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-Mikrotik-WireGuard-VPN/PUQ_WHMCS-Mikrotik-WireGuard-VPN-latest.zip
   

2. Unzip the archive:

   unzip PUQ_WHMCS-Mikrotik-WireGuard-VPN-latest.zip
   

3. Copy the puqMikrotikWireGuardVPN directory into your WHMCS installation under modules/servers/:

   cp -r puqMikrotikWireGuardVPN /path/to/whmcs/modules/servers/
   

   The resulting directory structure should look like:

   modules/
     servers/
       puqMikrotikWireGuardVPN/
         puqMikrotikWireGuardVPN.php
         hooks.php
         lib/
         templates/
         lang/
         ...
   

Update

The update process is identical to the installation:

1. Download the latest archive from the download page:

   wget https://download.puqcloud.com/WHMCS/servers/PUQ_WHMCS-Mikrotik-WireGuard-VPN/PUQ_WHMCS-Mikrotik-WireGuard-VPN-latest.zip
   

2. Unzip the archive:

   unzip -o PUQ_WHMCS-Mikrotik-WireGuard-VPN-latest.zip
   

3. Replace the existing puqMikrotikWireGuardVPN directory in your WHMCS installation:

   cp -r puqMikrotikWireGuardVPN /path/to/whmcs/modules/servers/
   

Warning: When updating from v2.x to v3.x+, product reconfiguration is required due to the new settings storage format.